Pacific-cycles 2RIDER Manuel d'utilisateur

2RiderAssemblymanual2RiderAssembly manual(Picture shown with optional canopy and kid seats)CanopySafety barKid seatsSeatsHandlebarGrip shifterBrakeL

2RiderAssemblymanual10Step 7:Assemble the rear wheels to the rear dropouts and hook the rear V brake cable.

2RiderAssemblymanual11Step 8:Assemble the luggage tray.

2RiderAssemblymanual12Step 9:Assemble the seats, and insert the grip shifter on the right seat handlebar.

2RiderAssemblymanual13Step 10:Assemble the kit seat to the kit seat stays, and assemble the kit seat subassembly to the main chassis. Insert the saf

2RiderAssemblymanual14Step 11:Assemble the canopy.

2RiderAssemblymanual15Step 12:Align the handlebar and front wheels, adjust the derailleurs and brakes, and check all bolts and nuts are tight. Note:

2RiderAssemblymanual2Rider features• 4 seats for 2 riders and 2 passengers. • 8 speed gears for effortless rides. • Full suspension for max comfort

2RiderAssemblymanualSpecification• Chassis Aluminum 7005T6, powder coated.• Suspension All wheels independently suspended.• Geometry Ackermann geome

2RiderAssemblymanualStep 1: Take out all parts in the box and raise the chassis about 40 cm height for ease of assembly work. 41234567 89101112(1) C

2RiderAssemblymanual5Step 2:Insert the handlebar stem to the steerer, tighten the clamp and the setting screw.

2RiderAssemblymanual6Step 3:Connect the left steering link rod.

2RiderAssemblymanual7Step 4:Assemble the pedals to crank arms at both sides.*This step will not affect any other sub-assembly, you can decide do it

2RiderAssemblymanual8Step 5:Assemble the bow and front bumper to the chassis.

2RiderAssemblymanual9Step 6:Assemble the front wheels to the front axle and hook the front V brake cable.*Tools needed:10mm Allen key wrench, 19mm o